Euro Towers - Cantilever System

Our Cantilver tower systems conform to BS 1139-6:2014 and are available to use with the EuroTowers ladder frame towers in 2, 2.5 & 3m lengths. This system has two configurations which is end on or side on, this means that there are more solutions to your access needs. Should you be unsure on these configurations don't hestiate to get in touch with our team. This cantilever system uses a buttress system and counter balancing weights to add security of the system.

Cantilever frames or units are very useful when accessing items that have a restriction at the base. We can calculate and manufacture cantilever units for most requirements.

Important Information:

ALL ballast weight MUST be evenly spread over platforms AND secured in place.

ALL ballast weight MUST be of solid material, not sand, water, other liquids or granular materials.

Additional Buttress platforms may be required on some towers.

NEVER remove the Ballast whilst the Cantilever Section is in place or before the Tower is below 2m platform height.

Single Width Cantilever Frames from Side On or End On builds use the same Ballast weight stated.

Please note: We can calculate required ballast weights for Cantilever systems as shown in the image but do not supply the ballast weight itself. This can be any form of solid weight such as steel blocks