The Ladder Stabilising System consists of three parts. All parts use clamps to enable rapid and secure attachment to BS/EN 131 ladders. No drilling required.

Stabiliser Arms - a pair of arms attached to the lower part of the ladder, just above the bottom run and 1 metre above that point. The arm is hinged at the bottom and when released from its catch so that the foot reaches the ground, it is locked into position by a telescopic strut which has locking positions at 12 mm intervals. These arms provide the required resistance to Flip and in some part Top Slip.

Wheels - the second part consists of a pair of free-running rubber-tyred wheels attached to the stiles at the top of the ladder. The soft, sticky rubber is made from the same type of compound used for racing car tyres and provides enormous resistance to Top Slip.

Safety Feet - using the knowledge gained from the manufacture of the rubber for the top wheels, our safety feet give a level of grip which far exceeds the grip levels provided by standard ladder feet and also the requirements of the Loughborough tests. They attach to both stiles at the bottom of the ladder.


Stabiliser Arms locking positions at 12 mm intervals

Wheels soft, sticky, free running tyred wheels

Safety Feet super grip safety feet